
                                 patmatdb 



Function

   Search a protein sequence with a motif

Description

   Takes a protein motif and compares it to a set of protein sequences.

   It returns the number of matches there were between the motif and each
   matched sequence, length of match, start and end positions of match,
   and writes out an alignment.

Usage

   Here is a sample session with patmatdb


% patmatdb 
Search a protein sequence with a motif
Input sequence(s): tsw:*
Protein motif to search for: st[ty]s
Output report [100k_rat.patmatdb]: 

   Go to the input files for this example
   Go to the output files for this example

Command line arguments

   Standard (Mandatory) qualifiers:
  [-sequence]          seqall     Sequence database USA
  [-motif]             string     Patterns for patmatdb are based on the
                                  format of pattern used in the PROSITE
                                  database. For example:
                                  '[DE](2)HS{P}X(2)PX(2,4)C' means two Asps or
                                  Glus in any order followed by His, Ser, any
                                  residue other then Pro, then two of any
                                  residue followed by Pro followed by two to
                                  four of any residue followed by Cys. The
                                  search is case-independent, so 'AAA' matches
                                  'aaa'.
  [-outfile]           report     Output report file name

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers: (none)
   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1             integer    Start of each sequence to be used
   -send1               integer    End of each sequence to be used
   -sreverse1           boolean    Reverse (if DNA)
   -sask1               boolean    Ask for begin/end/reverse
   -snucleotide1        boolean    Sequence is nucleotide
   -sprotein1           boolean    Sequence is protein
   -slower1             boolean    Make lower case
   -supper1             boolean    Make upper case
   -sformat1            string     Input sequence format
   -sdbname1            string     Database name
   -sid1                string     Entryname
   -ufo1                string     UFO features
   -fformat1            string     Features format
   -fopenfile1          string     Features file name

   "-outfile" associated qualifiers
   -rformat3            string     Report format
   -rname3              string     Base file name
   -rextension3         string     File name extension
   -rdirectory3         string     Output directory
   -raccshow3           boolean    Show accession number in the report
   -rdesshow3           boolean    Show description in the report
   -rscoreshow3         boolean    Show the score in the report
   -rusashow3           boolean    Show the full USA in the report

   General qualifiers:
   -auto                boolean    Turn off prompts
   -stdout              boolean    Write standard output
   -filter              boolean    Read standard input, write standard output
   -options             boolean    Prompt for standard and additional values
   -debug               boolean    Write debug output to program.dbg
   -verbose             boolean    Report some/full command line options
   -help                boolean    Report command line options. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning             boolean    Report warnings
   -error               boolean    Report errors
   -fatal               boolean    Report fatal errors
   -die                 boolean    Report deaths


   Standard (Mandatory) qualifiers Allowed values Default
   [-sequence]
   (Parameter 1) Sequence database USA Readable sequence(s) Required
   [-motif]
   (Parameter 2) Patterns for patmatdb are based on the format of pattern
   used in the PROSITE database. For example: '[DE](2)HS{P}X(2)PX(2,4)C'
   means two Asps or Glus in any order followed by His, Ser, any residue
   other then Pro, then two of any residue followed by Pro followed by
   two to four of any residue followed by Cys. The search is
   case-independent, so 'AAA' matches 'aaa'. A string of at least 2
   characters Required
   [-outfile]
   (Parameter 3) Output report file name Report output file
   Additional (Optional) qualifiers Allowed values Default
   (none)
   Advanced (Unprompted) qualifiers Allowed values Default
   (none)

Input file format

   patmatdb reads in one or more protein sequence USAs.

  Input files for usage example

   'tsw:*' is a sequence entry in the example protein database 'tsw'

  Pattern specification

   Patterns for patmatdb are based on the format of pattern used in the
   PROSITE database, with the difference that the terminating dot '.' and
   the hyphens, '-', between the characters are optional.

   The PROSITE pattern definition from the PROSITE documentation follows.
     * The standard IUPAC one-letter codes for the amino acids are used.
     * The symbol `x' is used for a position where any amino acid is
       accepted.
     * Ambiguities are indicated by listing the acceptable amino acids
       for a given position, between square parentheses `[ ]'. For
       example: [ALT] stands for Ala or Leu or Thr.
     * Ambiguities are also indicated by listing between a pair of curly
       brackets `{ }' the amino acids that are not accepted at a given
       position. For example: {AM} stands for any amino acid except Ala
       and Met.
     * Each element in a pattern is separated from its neighbor by a `-'.
       (Optional in patmatdb).
     * Repetition of an element of the pattern can be indicated by
       following that element with a numerical value or a numerical range
       between parenthesis. Examples: x(3) corresponds to x-x-x, x(2,4)
       corresponds to x-x or x-x-x or x-x-x-x.
     * When a pattern is restricted to either the N- or C-terminal of a
       sequence, that pattern either starts with a `<' symbol or
       respectively ends with a `>' symbol.
     * A period ends the pattern. (Optional in patmatdb).

   For example, in SWISSPROT entry 100K_RAT you can look for the pattern:

[DE](2)HS{P}X(2)PX(2,4)C

   This means: Two Asps or Glus in any order followed by His, Ser, any
   residue other then Pro, then two of any residue followed by Pro
   followed by two to four of any residue followed by Cys.

   The search is case-independent, so 'AAA' matches 'aaa'.

Output file format

   The output is a standard EMBOSS report file.

   The results can be output in one of several styles by using the
   command-line qualifier -rformat xxx, where 'xxx' is replaced by the
   name of the required format. The available format names are: embl,
   genbank, gff, pir, swiss, trace, listfile, dbmotif, diffseq, excel,
   feattable, motif, regions, seqtable, simple, srs, table, tagseq

   See: http://emboss.sf.net/docs/themes/ReportFormats.html for further
   information on report formats.

   By default patmatdb writes a 'dbmotif' report file.

  Output files for usage example

  File: 100k_rat.patmatdb

########################################
# Program: patmatdb
# Rundate: Fri Jul 15 2005 12:00:00
# Report_format: dbmotif
# Report_file: 100k_rat.patmatdb
########################################

#=======================================
#
# Sequence: HD_FUGRU     from: 1   to: 3148
# HitCount: 1
#
# Motif: ST[TY]S
#
#=======================================

Length = 4
Start = position 1038 of sequence
End = position 1041 of sequence


STPASSTTSSAVDP
     |  |
  1038  1041


#---------------------------------------
#---------------------------------------
#=======================================
#
# Sequence: GCN4_YEAST     from: 1   to: 281
# HitCount: 1
#
# Motif: ST[TY]S
#
#=======================================

Length = 4
Start = position 158 of sequence
End = position 161 of sequence


SNLEVSTTSFLPTP
     |  |
   158  161


#---------------------------------------
#---------------------------------------
#=======================================
#
# Sequence: PAXI_HUMAN     from: 1   to: 557
# HitCount: 1
#
# Motif: ST[TY]S
#
#=======================================

Length = 4
Start = position 13 of sequence
End = position 16 of sequence


LADLESTTSHISKR
     |  |
    13  16


#---------------------------------------
#---------------------------------------

Data files

   None.

Notes

   None.

References

    1. Bairoch, A., Bucher P. (1994) PROSITE: recent developments.
       Nucleic Acids Research, Vol 22, No.17 3583-3589.
    2. Bairoch, A., (1992) PROSITE: a dictionary of sites and patterns in
       proteins. Nucleic Acids Research, Vol 20, Supplement, 2013-2018.
    3. Peek, J., O'Reilly, T., Loukides, M., (1997) Unix Power Tools, 2nd
       Edition.
    4. Gusfield, D., (1997) Algorithms on strings, Trees and Sequences.
    5. Sedgewick, R,. (1990) Algorithms in C.

Warnings

   None.

Diagnostic Error Messages

   None.

Exit status

   It always exits with status 0

Known bugs

   None.

See also

    Program name                         Description
   antigenic      Finds antigenic sites in proteins
   digest         Protein proteolytic enzyme or reagent cleavage digest
   epestfind      Finds PEST motifs as potential proteolytic cleavage sites
   fuzzpro        Protein pattern search
   fuzztran       Protein pattern search after translation
   helixturnhelix Report nucleic acid binding motifs
   oddcomp        Find protein sequence regions with a biased composition
   patmatmotifs   Search a PROSITE motif database with a protein sequence
   pepcoil        Predicts coiled coil regions
   preg           Regular expression search of a protein sequence
   pscan          Scans proteins using PRINTS
   sigcleave      Reports protein signal cleavage sites

Author(s)

   Sinead O'Leary (current e-mail address unknown)
   while she was at:
   HGMP-RC, Genome Campus, Hinxton, Cambridge CB10 1SB, UK

History

   Completed April 30 1999.

Target users

   This program is intended to be used by everyone and everything, from
   naive users to embedded scripts.

Comments

   None
